Sfera Luce 30 LED Light Sphere In Polyethylene For Outdoor And Indoor 6000k White

Professional Led Sined Light Sphere diameter 30 cm. Waterproof IP 65, for all outdoor and indoor activities, garden, swimming pool, hotel, beach resort, restaurants.
Thanks to the internal solar panel and lithium battery, it does not need to be returned to the charging station every time, but can be left in the garden or swimming pool.
The USB charging cable is only used for the first charge or if you use them indoors.
The supplied remote control allows you to change the colors and light effects
Made in Italy

Applications of LED Light Sphere
- Garden decoration.
- Decoration at events or weddings.
- Night decoration.
- Decoration of beach bars and chill out areas.
- Decoration of relaxation or spa areas.
- Interior or room decoration.

TECHNICAL SPECIFICATIONS
1) Lamp diffuser material: LLDPE
2) Lamp base material: ABS
3) Picket material: ABS
4) Light source:
2pcs. RGB LED 0.5W
1pcs. LED 6000K 0.5W
5) Solar power:
1.5W/solar voltage:
5V/Solar amperage: 300mA
6) Rechargeable lithium battery:
1 x 18650, 1800mAh, 3.7V
7) Operation: more than 12 hours.
8) Charging: 12 to 15 hours by sunlight,
alternatively recharge with DC plug, 5 hours.
9) Power switch: Red-Green-Blue-Orange-Blue-Cyan, Purple-White and Continuous color change
10) Waterproof class: IP65
Features : - The lighting part is RGB, you can change the color of the remote control, intensity and light effect (fixed or flashing).
- The lithium battery can be charged using the supplied USB cable (if you use it indoors, recommended for the first charge).
- There is a button underneath to turn it on, then it stays on and charges during the day and lights up by itself in the evening, the light must be adjusted with the remote control.
- When the light intensity drops below a certain degree, the system detects it and automatically turns on the light.
- At the base there is the possibility of inserting a supplied stake to fix them to the ground in a stable manner.



MADE WITH ROTATIONAL MOULDING

How it works
The material, generally in powder form, is loaded into the mold and rotated simultaneously on two perpendicular axes inside the oven.
During the heating phase, the powder gradually becomes fluid, so as to reach every point of the internal surface of the mold.
In this way, a thickness is obtained that will become solid in the subsequent cooling phase.
Rotational molding is a technological process that allows the creation of hollow objects with constant thickness without any welding points.
Low environmental impact production technique, as the powders are melted without direct contact with flames or heat sources.
The heating oven works by heating the environment in which the mold is located, which in turn heats and shapes the raw material contained within it by induction.

Final finish
This technique is particularly advantageous due to the flexibility of the production process, the low production of waste and the low cost of the moulds used.
Liquid paints are used for plastic painting, since plastic materials are more susceptible to them. Particularly suitable for metal and plastic surfaces, liquid paints have no limits on shades and colours and are therefore suitable for the most varied applications.


Strengths:
Solar light sphere for indoors and outdoors complete with photovoltaic panel and brightness sensor - turns on automatically at dusk
Solar lamp with IP65 protection and LED light with interchangeable colours via button
The Sined Light Sphere works for over 12 hours and is equipped with a rechargeable lithium battery.
Solar LED sphere recharges 12-15 hours or via USB in 5 hours
Garden lamp with ground fixing by means of a spike, perfect for open spaces in hotels, bars and swimming pools


Link to the manual: Manual